Question :You are a network technician at IGCT, Inc. You are currently troubleshooting a routing issue on the IGCT1. You issue the show ip route command. The output from the command is displayed in the following exhibit:
testking1#show ip route Codes: C - connected, S - static, I - IGRP, R- RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inner area
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - Candidate
default
U - per-user static route
Gateway of last resort is not set
R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
C 192.168.9.0/24 is directly connected, Serial1
R 192.168.10.0/24 [120/7] via 192.168.9.1, 00:00:02, Serial1
R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C 192.168.1.0/24 is directly connected, Ethernet0
C 192.168.2.0/24 is directly connected, Serial0
R 192.168.3.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
R 192.168.4.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
Leading the way in IT testing and certification tools, www.testking.com
- 541 -
R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
R 192.168.6.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
R 192.168.7.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
Which one of the following routes WILL NOT be entered into its neighboring
routers routing table?
A. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
B. C 192.168.1.0/24 is directly connected, Ethernet0
C. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
E. None of the above
Answer :D
Explanation:
RIP has the maximum hop count of 15. This route already has a hop count of 15 and
adding one would make it unreachable (see below). This route will be discarded.
R 202.30.5.0/24 [120/15] via 202.30.2.2, 00:00:10, Serial0
testking1#show ip route Codes: C - connected, S - static, I - IGRP, R- RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inner area
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - Candidate
default
U - per-user static route
Gateway of last resort is not set
R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
C 192.168.9.0/24 is directly connected, Serial1
R 192.168.10.0/24 [120/7] via 192.168.9.1, 00:00:02, Serial1
R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C 192.168.1.0/24 is directly connected, Ethernet0
C 192.168.2.0/24 is directly connected, Serial0
R 192.168.3.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
R 192.168.4.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
Leading the way in IT testing and certification tools, www.testking.com
- 541 -
R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
R 192.168.6.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
R 192.168.7.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
Which one of the following routes WILL NOT be entered into its neighboring
routers routing table?
A. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
B. C 192.168.1.0/24 is directly connected, Ethernet0
C. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
E. None of the above
Answer :D
Explanation:
RIP has the maximum hop count of 15. This route already has a hop count of 15 and
adding one would make it unreachable (see below). This route will be discarded.
R 202.30.5.0/24 [120/15] via 202.30.2.2, 00:00:10, Serial0