Refer to the topology and partial configuration output shown in the graphic. The ip subnet-zero configuration command is also in effect?

A. 10.10.0.1
B. 10.10.0.17
C. 200.2.2.17
D. 200.2.2.18
E. 199.99.9.33
F. 199.99.9.57

Answer: F


Explanation:
Regarding NAT operation, Cisco defines these terms as follows:
1. Inside local address - The IP address assigned to a host on the inside network. This is the address configured as a parameter of the computer's OS or received via dynamic address allocation protocols such as DHCP. The address is likely not a legitimate IP address assigned by the Network Information Center (NIC) or service provider.

Inside global address - A legitimate IP address assigned by the NIC or service provider that represents one or more inside local IP addresses to the outside world. In this case, the NAT pool is used to distribute the Inside Global IP addresses.
3. Outside local address - The IP address of an outside host as it appears to the inside network. Not necessarily a legitimate address, it is allocated from an address space routable on the inside.
4. Outside global address - The IP address assigned to a host on the outside network by the host's owner. The address is allocated from a globally routable address or network space.