Which router console commands are used to manage telnet sessions to other routers?

A. TestKingD# disconnect 3
B. TestKingD# exit session 2
C. TestKingD# kill connection 1
D. TestKingD# show sessions
E. TestKingD# show connection all
F. TestKingD# resume 4

Answer: A, D, F

Explanation:
Function Command Options
Telnet to another device Use telnet exec command.
Just type the host or IP address from
exec mode.
Suspend a Telnet session Press the key sequence Ctrl-Shift-6,
then x
Discover currently suspended Telnet
session
Use the where exec command
Use the show sessions exec command
Resume a suspended Telnet session Use the resume command, with no
parameter, to reconnect to the most
recently suspended Telent.
Use the resume x command, where x
is the number of the suspended
Telent session based on the output of
show sessions.
Just press Enter in exec mode to
resume to the most recently
suspended Telent session.
Terminate a suspended telnet Resume connection, and log out
using the quit command.
Use the disconnect command on the
router you Telnnetted from.